Rack PDU 2G, Switched, ZeroU, 20A/208V, 16A/230V, (21) C13 & (3) C19 
  APC Switched Rack Power Distribution Units (PDUs) enable advanced, user-customizable power control and active monitoring. Remote outlet level controls allow power on/off functionality for power recycling to remotely reboot equipment and restrict unauthorized use of individual outlets. Power sequencing delays allow users to define the order in which to power up or down attached equipment. Avoid circuit overload during power recovery and extend uptime of critical equipment by prioritizing the load shedding. Current metering provides real-time remote monitoring of connected loads. Switched Rack PDUs include real power monitoring, a temperature/humidity sensor port, locking IEC receptacles, and low profile circuit breakers. User-defined alarms warn of potential circuit overloads before critical IT failures occur. Users can access, configure, and control Switched Rack PDUs through secure Web, SNMP, or Telnet Interfaces and is complimented by APC Centralized Management platforms using InfraStruxure Central, Capacity Manager and Change Manager. 
   
  Includes: Installation guide , Rack Mounting brackets , Safety guide , Serial configuration cable 
   |   
  
| 
Official Product Link | 
Open Link |  
  | Output | 
  
    
       Nominal Output Voltage 
      100V , 200V , 208V , 230V
    
      Overload Protection 
      No
    
      Maximum Total Current Draw 
      16
    
      Output Connections 
      
        (3) IEC 320 C19 (Battery Backup) 
        (21) IEC 320 C13 (Battery Backup) 
       
    
   | 
 
  | Input | 
  
    
       Nominal Input Voltage 
      200V , 208V , 230V
    
      Input frequency 
      50/60 Hz
    
      Input Connections 
      IEC-320 C20
    
      Acceptable Input Voltage 
      100-240VAC
    
      Maximum Input Current 
      20A
    
      Regulatory Derated Input Current (North America) 
      16A
   | 
 
  | Physical | 
  
    
       Maximum Height 
      1791mm , 179.1cm
    
      Maximum Width 
      56mm , 5.6cm
    
      Maximum Depth 
      46mm , 4.6cm
    
      Net Weight 
      5.73kg
    
      Shipping weight 
      7.86kg
   | 
 
  | Environmental | 
  
    
       Operating Environment 
      -5 - 45 °C
    
      Operating Relative Humidity 
      5 - 95 %
    
      Operating Elevation 
      0-3000meters
    
      Storage Temperature 
      -25 - 65 °C
    
      Storage Relative Humidity 
      5 - 95 %
    
      Storage Elevation 
      0-15000meters
   | 
 
  | Conformance | 
  
    
       Approvals 
      cUL Listed, EN 55022 Class A, EN 55024, EN 61000-3-2, EN 61000-3-3, FCC Part 15 Class A, ICES-003, PSE, UL Listed, VDE
    
      Standard warranty 
      2 years repair or replace
   | 
 
  | Sustainable Offer Status | 
  
    
       RoHS 
      Compliant
    
      REACH 
      REACH: Contains No SVHCs
    
      PEP 
      Available in Documentation tab
    
      EOLI 
      Available in Documentation tab
    
      Battery Directive 
      Compliant
    
      Battery Notes 
      ts_Battery_Notes
   | 
 
 
 
 * Specifications are subject to change without notice.  
   * Specifications may vary. 
   * The product picture(s) is only for your reference, it may differ from the actual product. 
  
 
  
  
 
   |