DJI Mic Wireless Microphone with 2x Transmitter and 1x Receiver (CP.RN.00000198.03)
DJI Mic includes a 30 g transmitter and 24.9 g receiver (AST01/ASR01) with GFSK 1/2 Mbps operation at 2.4‑2.4835 GHz, 320 mAh battery delivering ~5 h use, omnidirectional mic (50‑20 kHz), 114 dB SPL, 250 m FCC range.
Our team is ready to help! Please contact us if you have any questions about product specifications, stock availability, or compatibility.
SPECIFICATIONS:
DJI MIC TRANSMITTERS
Model
AST01
Dimensions
47.32×30.43×20.01 mm
Weight
30 g
Wireless Mode
GFSK 1 Mbps and 2 Mbps
Equivalent Isotropic Radiated Power (EIRP)
<20 dBm
Operating Frequency
2400-2483.5 MHz
Battery Type
LiPo 1S
Battery Capacity
320 mAh
Battery Energy
1.23 Wh
Battery Voltage
3.85 V
Charging Temperature
5 to 45° C (41° to 113° F)
Operating Temperature
-10° to 45° C (14° to 113° F)
Charging Time
70 mins
Operating Time
5.5 hours
DJI MIC RECEIVER
Model
ASR01
Dimensions
47.44×32.21×17.35 mm
Weight
24.9 g
Wireless Mode
GFSK 1 Mbps and 2 Mbps
Equivalent Isotropic Radiated Power (EIRP)
<20 dBm
Operating Frequency
2400-2483.5 MHz
Battery Type
LiPo 1S
Battery Capacity
320 mAh
Battery Energy
1.23 Wh
Battery Voltage
3.85 V
Charging Temperature
5 to 45° C (41° to 113° F)
Operating Temperature
-10° to 45° C (14° to 113° F)
Charging Time
70 mins
Operating Time
5 hours
CHARGING CASE
Model
ASB01
Dimensions
103.06×61.87×41.50 mm
Weight
162.2 g
Battery Type
LiPo 1S
Battery Capacity
2600 mAh
Battery Energy
10 Wh
Battery Voltage
3.87 V
Charging Temperature
5 to 45° C (41° to 113° F)
Operating Temperature
5 to 45° C (41° to 113° F)
Charging Time
2 hours and 40 mins
Operating Time
Fully charge three devices simultaneously 1.8 times
GENERAL
Microphone Directions
All Directions
Frequency Response
Low Cut Off: 50 Hz - 20 kHz
Low Cut On: 150 Hz - 20 kHz
Max Sound Pressure Level (SPL)
114 dB SPL
Max Input Level (3.5 mm)
-17 dBV (THD < 0.1%)
Equivalent Noise
23 dBA
Monitor Interface Output Power
Max Output 22mW@1kHz, 32Ω
Max Transmission Distance
250 m (FCC)
160 m (CE)
* Measured in an unobstructed outdoor environment free of interference.
OTHERS
Notes
1. Measured with FCC compliance in an unobstructed environment without interference (160 m under CE).
2. Not supported by DJI Mic (1 TX + 1 R X), which does not include the charging case.
3. Tested with a 48,000Hz sampling rate and 24-bit mono WAV audio format.
4. Tested with 2 transmitters connected to the receiver, without backup recording, and the receiver connected to a camera.
Product Name:
DJI Mic Wireless Microphone with 2x Transmitter and 1x Receiver (CP.RN.00000198.03)